| Customization: | Available |
|---|---|
| Type: | Feeler Gauge |
| Material: | Aluminum Alloy |
|
Still deciding? Get samples of US$ 1570/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Our company has introduced a hand-held precision ultrasonic thickness gauge LUM-3 using single crystal delay line probe, which uses single crystal delay probe and uses multiple echoes to improve accuracy, so that the resolution can reach 0.001mm and the lower limit of measurement can reach 0.30 mm. LM-3 has two working modes: normal and precise. The common mode adopts the interface wave-echo method, and the measuring range is 1.5 mm ~ 20 mm; The precision mode adopts echo-echo method, and the measurement range is 0.30mm ~ 10 mm.
Suitable for measuring flat sheet steel parts.
Feature:
1. High precision, 0.001mm resolution
2. Suitable for measuring thin materials, can accurately and reliably measure 0.25mm flat thin steel plate material
3. Can penetrate through the coating, such as paint layer on the material, without polishing, can directly measure the thickness of the substrate
Specification:
|
Model |
LM-3 |
|
Display |
128× 64 Dot Matrix LCD Display (EL Backlight) |
|
Working principle |
Interface wave-echo mode (normal mode) echo-echo mode (precision mode) |
|
Measuring range |
1.5~20mm (Normal mode) 0.3~10mm (Precision mode) |
|
Unit and Display Resolution |
Millimeter-0.001,0.01,0.1 inch-0.0001,0.001,0.01 |
|
Indication error |
±0.01 mm (below 3mm) ;±0.05 mm (below 20 mm) |
|
Calibration mode |
One-point calibration, two-point calibration |
|
The measurement update rate |
For routine measurement: 4Hz; scanning the minimum value:25 Hz |
|
The sound speed range of the material |
1000~9999m/s or 0.0394~0.3937in/us |
|
The storage function |
divided into 5 arrays, which can store 500 thickness values. |
|
Sound speed storage |
store the sound speed of 5 different materials. |
|
Language |
Chinese or English |
|
Power supply |
two 1.5V AA batteries. When the power is insufficient, there will be a low voltage prompt. |
|
Operating time |
alkaline battery can be used for 200 hours (no backlight) |
|
Automatically shut down |
after 5 minutes without operation |
|
Working temperature |
-10ºC ~+50ºC, with special requirements up to -20ºC |
|
Size |
149*73*32mm |
|
Weight |
200g (including battery) |
|
Standard configuration |
LM-3 thickness gauge, single crystal probe, instrument box, two alkaline batteries, coupling agent, operation manual, certificate of approval and packing list |
Optional accessories:
|
Model |
Frequency |
Contact diameter |
|
D15A |
15MHZ |
6mm |
|
Configuration list |
|
|
Mainframe |
1 |
|
Coupling agent |
1 |
|
Probe |
1 |
|
Battery |
2 |
|
Packing document |
1 |
|
Instrument seal box |
1 |
|
Note: If send it by air, not including batteries, it's an empty bottle for Coupling agent. |
|
){kind=link}