Model |
LM-2 |
LM-2D |
Measuring range |
0.8-300 mm (Depending on the probe and the material to be tested, the standard measurement range:1-100mm) |
Penetration mode |
NO |
3-18 mm |
working principle |
Pulse-echo mode |
Pulse-echo mode, Echo-echo mode |
Probe compensation line |
A probe compensation line is built in |
7 kinds of probe compensation wires are built in and matched with 7 kinds of probes. |
Measurement resolution |
0.1mm |
Display |
128× 64 Dot Matrix LCD Display with EL Backlight, Adjustable contrast |
Repeatability |
±0.05mm |
Unit and Display Resolution |
Millimeter-0.01,0.1 inch-0.001,0.01 |
Calibration mode |
zero calibration, two-point calibration |
The measurement update rate |
4Hz |
The sound speed range of the material |
1000~9999m/s or 0.0394~0.3937in/us |
The storage function |
divided into 5 arrays, which can store 500 thickness values. |
Alarm function |
set the thickness limit and give an alarm to the measured value outside the limit. |
Sound speed storage |
store the sound speed of 5 different materials. |
language |
Chinese or English |
Communication interface |
USB interface or RS232 serial port (optional) |
power supply |
two 1.5V AA batteries. When the power is insufficient, there will be a low voltage prompt. |
Operating time |
Two No.5 Batteries can be used for 200 hours (no backlight) |
Automatically shut down |
after 5 minutes without operation |
working temperature |
-10ºC ~+50ºC, with special requirements up to -20ºC |
Size |
149*73*32mm |
Weight |
200g (including battery) |
Standard configuration |
thickness gauge host, standard probe, instrument box, two alkaline batteries, coupling agent, operation manual, certificate of approval and packing list |
Optional accessories |
rubber sheath, a variety of optional probes; Step test block for calibration; Coupling agent and high temperature coupling agent
|