48*250ml Lab Reciprocating Water Bath Shaker

• Customization: Available
• Application: Lab
• Customized: Customized
• Model NO.: LH-110*48
• Certification: CE
• Structure: Floor-Standing
• Material: Stainless Steel
• Type: Electric Thermostatic Water Bath
• Control Method: P.I.D
• Display Method: LCD
• Oscillation Mode: Reciprocating Oscillation
• Drive Mode: Track Balanced Drive
• Reciprocating Frequency: 20-200rpm
• Stroke Range: 25mm
• Temperature Control Range: Ambient Temperature-100c
• Temperature Control Accuracy: +-0.1
• Inner Cavity Size: 940*660*275(mm)
• Maximum Capacity: 48*250ml/500ml*30/1000ml*20
• Power: 4000W
• Motor: 60W Inverter Motor
• Voltage: AC 200-240V 50-60Hz
• Gross Weight: 115kg
• Dimensions: 1240*700*760(mm)
• Transport Package: Standard Export Package
• Specification: 48*250mL
• Trademark: LABOAO
• Origin: China
• HS Code: 8479820090
• Production Capacity: 5000 Set/Mouth

Product Description

 

LAB Reciprocating Shaking Thermostatic Water Bath

1. Features of lab shaking thermostatic water bath

1. The latest design of anti-shake with floating buffer has the characteristics of low noise operation and no vibration of the whole machine.
2. The drain valve on the left side of the shaker allows for easy drainage and cleaning and disinfection of the inside of the shaker.
3. With a stainless-steel cover to prevent heat loss and moisture evaporation.
4. 316L stainless steel liner, stainless steel electropolished rocking plate, spring, flask clamp.
5. Intelligent sound and light alarm environment scanning microprocessor controller.
6. The temperature control linearity is good, the fluctuation is small, and the temperature uniformity reaches 0.1 °C.
7. The LCD screen double displays various setting parameters and measured parameters.
8. Run the parameter memory function to avoid cumbersome operations.
9. When the measured temperature deviates from the set temperature by 3 °C, the host automatically stops heating and sounds an audible alarm.
10. Double over-temperature protection design, when the heater component has low water level and the test sample is over-temperature, the host can automatically cut off the heating power.
11. With anti-dry protection.
12. With power-off recovery function, after the external power supply suddenly loses power and calls again, the device can automatically resume operation according to the original setting procedure.
13. 500 hours timing setting, the LCD display shows the remaining time, the timing end device can automatically stop and sound and light alarm.

2.Security of lab shaking thermostatic water bath

1. Leakage current and overcurrent protection systems ensure operator safety.
2. Over-temperature, over-speed sound and light alarm emergency control system to ensure sample safety

3.Technical parameter of lab shaking thermostatic water bath

Product number	LH-110*48(Floor-standing)
control method	P.I.D microcomputer environment scanning micro-processing chip control
Display method	LCD liquid crystal display
Oscillation mode	Reciprocating oscillation
Drive mode	Track balanced drive
security function	Upper and lower limit over-temperature sound and light alarm; upper and lower limit overspeed alarm; independent over-temperature protector; open door stop protection; leakage or over-current protection device;
Accessory function	Speed storage, call recovery, parameter memory, temperature speed correction, clock display
Programming function	Repeat, pacing, eight-segment curve programming
Reciprocating frequency	20-200rpm
Frequency accuracy	±1rpm
Stroke range	φ25mm
Maximum capacity	48*250ml/500ml*30/1000ml*20
Rocker size	780*586(mm)
Spring rocker size	780*586*80(mm)
Timing range	0-999.59 hours
Temperature control range	Ambient temperature-100ºC
Temperature control accuracy	±0.1(Constant temperature state)
Temperature uniformity	±0.2ºC
Number of rocking plates	One
Inner cavity size	940*660*275(mm)
Dimensions	1240*700*760(mm)
net weight	80kg
Gross weight	115kg
power	4000W
Motor	60W Inverter motor
Voltage	AC 200-240V 50-60HZ